The Yamaha Blaster 200 is a compact and lightweight all-terrain vehicle (ATV) that was designed as an entry-level machine, produced from 1988 to 2006. Known for its affordable price, the Blaster quickly gained popularity among ATV enthusiasts, who continue to enjoy modifying and riding it even today. Powered by a 195cc two-stroke engine, the Blaster is known for its easily modifiable design, with a wide range of aftermarket parts available. From simple bolt-on upgrades to big bore kits and suspension modifications, riders can boost the performance and power of this agile quad. Despite its age, the Blaster continues to hold its own against modern four-stroke machines.
NOTE:
●For ATVs not equipped with an odometer or an hour meter, follow the month maintenance intervals.
●For ATVs equipped with an odometer or an hour meter, follow the km (mi) or hours maintenance intervals.
●Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills.
ITEM
ROUTINE
INITIAL
EVERY
Whichever comes first
month
1
3
6
6
12
km (mi)
320
(200)
1200
(750)
2400
(1500)
2400
(1500)
4800
(3000)
hours
20
75
150
150
300
Transmission
‣Replace oil.
✔️
✔️
✔️
✔️
Spark plug
‣Check condition. 9 Adjust gap and clean. 9 Replace if necessary.
✔️
✔️
✔️
✔️
✔️
Air filter element
‣Clean.
‣Replace if necessary.
Every 20–40 hours.
(More often in wet or dusty areas)
* Carburetor
‣Check idle speed / starter operation.
‣Adjust if necessary.
✔️
✔️
✔️
✔️
* Crankcase breather
system
‣Check breather hose for cracks or damage.
‣Replace if necessary.
✔️
✔️
✔️
* Exhaust system
‣Check for leakage.
‣Tighten if necessary.
‣Replace gasket if necessary.
✔️
✔️
✔️
Spark arrester
‣Clean.
✔️
✔️
✔️
ITEM
ROUTINE
INITIAL
EVERY
Whichever comes first
month
1
3
6
6
12
km (mi)
320
(200)
1200
(750)
2400
(1500)
2400
(1500)
4800
(3000)
hours
20
75
150
150
300
* Fuel line
‣Check fuel hose for cracks or damage.
‣ Replace if necessary.
✔️
✔️
✔️
Throttle operation
‣ Inspect and adjust free play if necessary.
✔️
✔️
✔️
✔️
✔️
* Front and rear brake operation
‣Check operation/fluid leakage.
‣Correct if necessary.
✔️
✔️
✔️
✔️
✔️
* Front and rear brake pads
‣Check pad wear.
‣ Replace if necessary.
✔️
✔️
✔️
* Clutch
‣Inspect free play and operation.
‣Replace if necessary.
✔️
✔️
✔️
✔️
Drive chain
‣Lubricate, check free play and alignment.
‣Replace if necessary.
✔️
✔️
✔️
✔️
* Drive chain guard and rollers
‣Check wear and replace if necessary.
✔️
✔️
✔️
* Steering system
‣Inspect play, clean and lubricate with lithium-soap- based grease.
✔️
✔️
✔️
✔️
✔️
* Front and rear suspension
‣Inspect and lubricate with lithium-soap-based
grease.
✔️
✔️
✔️
✔️
✔️
Tires
‣Inspect air pressure, wheel runout, and tire wear.
✔️
✔️
✔️
✔️
✔️
* Wheels
‣Inspect bearings.
‣Replace bearings if necessary.
✔️
✔️
✔️
✔️
✔️
* Throttle, control cables
‣Check routing and connection.
‣Lubricate.
✔️
✔️
✔️
✔️
✔️
Outside nuts and bolts
‣Tighten if necessary.
✔️
✔️
✔️
✔️
✔️
ITEM
ROUTINE
INITIAL
EVERY
Whichever comes first
month
1
3
6
6
12
km (mi)
320
(200)
1200
(750)
2400
(1500)
2400
(1500)
4800
(3000)
hours
20
75
150
150
300
Frame
‣Clean and inspect.
✔️
✔️
✔️
✔️
Lighting
‣Inspect.
✔️
✔️
✔️
✔️
✔️
●Recommended brake fluid: DOT 4
●Brake fluid replacement:
●When disassembling the master cylinders or caliper cylinders, replace the brake fluid. Normally check the brake fluid level and add fluid as required.
●On the inner parts of the master cylinders and caliper cylinders, replace the oil seals every two years.
●Replace the brake hoses every four years, or if cracked or damaged.
source: yamaha blaster 200 manual book